Installation Procedure
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Record the 10-digit STID number from the label on the VIU module.
- Install the VIU to the bracket.
- Connect the electrical connectors.
- Install the screws (1) securing the VIU to the bracket. Tighten the screws to 9 N.m (80 lb in).
- Install the IP trim panel. Refer to TRIM PANEL REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER .
- Contact the OnStar® Dealer Support line by pressing the OnStar® button twice. The 10-digit STID number recorded will be needed by the OnStar® Dealer Support line.