Measuring Wheel Alignment
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Satisfactory vehicle operation may occur over a wide range of alignment settings. If settings vary beyond the specifications, correct the alignment angles.
- Measure the front alignment angles.
- Install the alignment equipment according to the manufacturer's instructions.
- Jounce the front and rear bumpers lightly three times in order to normalize the suspension prior to measuring the angles.
- Measure the alignment angles and record the readings. If adjustments are required, make the adjustments in the following order:
- 4.1. Camber
- 4.2. Caster
- 4.3. Toe