Scan Tool Data Definitions
- Compressor Signal
-
Indicates when the compressor relay is activated.
- Controller Battery Volts
-
Range 10.0 V - 16.0 V. This data refers to the battery system voltage as measured by the suspension control module.
- Exhaust Signal
-
Indicates when the exhaust solenoid is commanded on or off.
- Left Rear Position Sensor
-
Range 0.5 V - 4.85 V. This data refers to vehicle height measured in volts.
- Rear Leveling Air Press
-
Indicates the system pressure in psi.
- Rear Leveling Air Press
-
Indicates the system pressure in volts.
- Right Rear Position Sensor
-
Range 0.5 V - 4.85 V. This data refers to vehicle height measured in volts.
- Sensor Supply Voltage
-
Indicates the voltage being supplied to the sensors from the suspension control module.
- Vehicle Speed
-
The speed of the vehicle.