Visual/Physical Check

Several of the symptom procedures ask for a careful visual and physical check. This step is extremely important. The visual and physical check can lead to correcting a problem without further checks, and can save valuable time. This inspection includes:
^ The PCM grounds for being clean, tight, and in the proper location
^ Vacuum hoses for splits, kinks, and proper connections, as shown on the Vehicle Emission Control Information label-Inspect thoroughly for any type of leak or restriction
^ The mass air flow (MAF) sensor installation-The arrows on the plastic portion of the sensor must point toward the engine.
^ The air intake ducts for being collapsed or for having damaged areas
^ Air leaks at throttle body mounting area, MAF sensor, and the intake manifold sealing surfaces
^ The ignition wires for cracking, hardness, and carbon tracking
^ The engine harness wiring and terminals for proper connections, pinches or cuts