LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> CTS Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control System >> Repair Instructions >> Dash Integration Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Connect the electrical connectors to the DIM.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the screws securing the DIM top the I/P.

    Tighten 

    Tighten the screws to 2 N.m 80 (lb in).

  3. Connect the closeout panel light electrical connector (1).
  4. Install the I/P closeout panel. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT -- RIGHT .
    Fig 1: Installing Dash Integration Module
    G02095508Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals