LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> DeVille Base >> Repair and Diagnosis (Single Page) >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Steering Column Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the control module (1) to the steering column and tighten the retaining screw.

    Tighten 

    Tighten screw to 2 N.m (15 lb in).

  2. Connect the electrical connectors on the steering column control module.
  3. Install the knee bolster. Refer to KNEE BOLSTER REPLACEMENT - LEFT (WITHOUT UV2) or KNEE BOLSTER REPLACEMENT - LEFT (UV2) in Instrument Panel, Gauges and Console.
  4. Program the steering column control module. Refer to STEERING COLUMN CONTROL MODULE PROGRAMMING  .
    Fig 1: Connecting Electrical Connectors On Steering Column Control Module
    G02139898Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals