LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis (Single Page) >> Restraints >> Restraints Control Systems >> Supplemental Inflatable Restraint System Deactivation Procedures >> Ford Motor Co. >> Disabling & Activating Air Bag System >> Disabling System (Focus)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Disabling System (Focus)

  1. Record radio preset frequencies for reprogramming (if equipped). Disconnect negative battery cable. Wait at least one minute for backup power supply to deplete stored energy.
  2. Remove driver air bag module. See DRIVER AIR BAG MODULE . Connect appropriate air bag simulator to clockspring connectors at top of steering column (in place of air bag). See AIR BAG SIMULATOR .
  3. Remove glove box. Disconnect passenger side air bag module electrical connectors. Connect appropriate air bag simulators to vehicle harness (in place of air bag). See AIR BAG SIMULATOR .
    4. WARNING: If vehicle is equipped with side air bags, manufacturer recommends removing front seats (with side air bag modules) before performing electrical diagnosis on air bag system. Seats may be left in vehicle if diagnostics are NOT being performed on side air bag system and air bag simulator is installed in place of side air bag harness.
  4. Working beneath driver's seat, disconnect driver side air bag module connector. Connect appropriate air bag simulator to vehicle harness (in place of air bag). See AIR BAG SIMULATOR . Repeat procedure for passenger side air bag module.
  5. Disconnect driver side pretensioner electrical connector. Connector is located under driver's seat. Connect a seat belt pretensioner simulator to vehicle harness (in place of pretensioner). See AIR BAG SIMULATOR . Repeat procedure for passenger side seat belt pretensioner. Connect negative battery cable.
scientia non olet · About LEMON Manuals