Test Description

The numbers below refer to the step numbers on the diagnostic table.

1. 15. This step verifies that the keyless entry serial data circuit is at B+ supplied by the BCM.
2. 16. This step tests for a short to voltage in the keyless entry serial data circuit.

Fig 1: Keyless Entry System Inoperative (1 Of 3)

Courtesy of GENERAL MOTORS CORP.

Fig 2: Keyless Entry System Inoperative (2 Of 3)

Courtesy of GENERAL MOTORS CORP.

Fig 3: Keyless Entry System Inoperative (3 Of 3)

Courtesy of GENERAL MOTORS CORP.