Installation Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the TP sensor.
Align the TP sensor with the throttle shaft.
- Install the TP sensor screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).
- Connect the TP sensor electrical connector (1).
- Install the air cleaner outlet resonator. Refer to Air Cleaner Outlet Resonator Replacement .
NOTE:
Refer to Fastener Notice in Cautions and Notices.
Fig 3: View Of TP Sensor, IAC Motor, ECT Sensor, Control Port Injector Module & Engine Harness Clip Bolt