LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 459 (Antilock Brake System, Traction Control System & Stability Control System) >> Repair Instructions >> Traction Control Switch Replacement (Stabilitrak) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.
  2. Gently lift the retaining tabs (2) and remove the stabilitrak switch (3) from the I/P assembly (1).
    3. Fig 1: View Of Stabilitrak Switch & I/P Assembly
    GM786376Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the harness connector from the stabilitrak switch.
    4. Fig 2: View Of Stabilitrak Switch Harness Connector
    GM788223Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals