Removal Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2004 GMC Yukon XL, 2004 GMC Yukon, 2004 Chevrolet Tahoe, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Electrical Connector At The Blower Motor

Courtesy of GENERAL MOTORS CORP.

If equipped, remove the sound insulator panel. Refer to Insulator Replacement - Instrument Panel (I/P) in Instrument Panel, Gages and Console.
Disconnect the electrical connector at the blower motor.

Fig 2: View Of Blower Motor Control Processor, Screws & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Disconnect the electrical connector (4) from the blower motor control processor (2).
Remove the blower motor control processor retaining screws (3) from the HVAC module (1).
Remove the blower motor control processor (2) from the HVAC module (1).