LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 595 (Seat System) >> Repair Instructions >> Heated Seat Control Module Replacement - Front >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2003 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  1. Install the heated seat control module and install the retaining screws (2).

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

  2. Connect the electrical connector.
  3. Install the seat cushion. Refer to SEAT CUSHION REPLACEMENT - FRONT  .
    Fig 1: Installing Heated Seat Control Module And Retaining Screws
    G02096154Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals