LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 621 (Stationary Window System) >> Repair Instructions >> Rear Window Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing & Installing Rear Window
    GM757629Courtesy of GENERAL MOTORS CORP.
  1. The locator pins (1) are used in order to hold the rear window in position.
  2. Install the rear window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
    3. Fig 2: Locating Rear Window Defogger Electrical Connector
    GM401856Courtesy of GENERAL MOTORS CORP.
  3. Connect all of the rear window electrical connectors.
  4. Install the headliner. Refer to Headliner Replacement in Interior Trim.
  5. Install the rear sail trim panels. Refer to Sail Panel Replacement in Interior Trim.
  6. Install the rear seat back. Refer to Seat Back Replacement - Rear in Seats.
  7. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
  8. Install the OnStar®antenna. Refer to Coupling Replacement - Antenna Inner and Coupling Replacement - Antenna Outer in Cellular Communication.
  9. Cycle the rear compartment lid open and close in order to position the lower reveal molding under the rear compartment lid.
  10. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
scientia non olet · About LEMON Manuals