DCM Programming/RPO Configuration (Export Only)
WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
When replacing door control modules on export vehicles, the door module must be reprogrammed in order to relearn the vehicle identification number (VIN).
The following steps explain how to program the replaced door control module:
- With the scan tool, navigate to the main menu for the door module that has been replaced.
- Select Special Functions.
- Select Door Zone Module VIN Relearn.
- Follow the on screen instructions in order to complete the relearn procedure.