Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Assist Handle

Courtesy of GENERAL MOTORS CORP.

Position the assist handle (3) to the headliner.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the two fasteners in order to retain the assist handle to the roof panel.
Tighten: Tighten the 2 screws to 2 N.m (18 lb in).
Secure the assist handle escutheons (2) to the outer edges of the assist handle.
Snap the escutheons in place in order to secure.