LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 652 (Personalization Systems) >> Description and Operation >> Driver Personalization >> Entering the Personalization Menu >> Base Audio System
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Base Audio System

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

To enter the Feature programming mode use the following procedure:

  1. If the vehicle has memory settings, press the appropriate memory button, 1 or 2, located on the driver door armrest. The driver information center (DIC) display will show either Driver 1 or 2 depending on which button was selected.
  2. Turn the ignition to ON without the engine running. Make sure an automatic transmission is in PARK (P) or a manual transmission has the parking brake set.
  3. Press the scroll/select knob once to access the main menu of the DIC.
  4. Turn the scroll/select knob until SETUP is highlighted.
  5. Press the scroll/select knob once to access the SETUP menu.
  6. Scroll to the PERSONALIZATION menu item and select it to access the PERSONALIZATION menu.
  7. Press the scroll/select knob until a check mark appears after the PERSONALIZATION menu item. This turns on the personalization feature. If you see a minus sign (-) after the PERSONALIZATION menu item, the personalization feature has been turned off.
scientia non olet · About LEMON Manuals