Base Audio System
WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
To program a name use the following procedure:
- Select the PERSONALIZATION NAME menu item by pressing the scroll/select knob once. You will see a blinking cursor.
- Turn the scroll/select knob until you reach the first letter you want to highlight. There is a complete alphabet with both upper and lower case letters and numbers zero through nine. Also included are spaces and other non-letter characters such as the ampersand (&).
- Press the scroll/select knob once to select the letter. The letter will then appear on the display. If you make a mistake, press the back key this will exit the menu. You can then go back into the menu and edit the name.
- Repeat steps 2 and 3 until the name you want is complete. You can program up to 26 characters.
- Press the BACK button located to the lower right of the display to exit and set your choice.