Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing & Installing Memory Seat Module-To-Seat Frame Screws

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the heated seat control module and install the retaining screws (2).
Tighten: Tighten the screws to 2 N.m (18 lb in).
Connect the electrical connector.
Install the seat cushion. Refer to Seat Cushion Replacement - Front .