Removal Procedure
WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the wiper motor mini 10 A and 30 A fuses. The wiper motor fuses are located in the underhood fuse block.
- Remove the wiper arm assemblies. Refer to Wiper Arm Replacement (LHD) or Wiper Arm Replacement (RHD) .
- Remove the air inlet grille (1,3). Refer to Air Inlet Grille Panel Replacement (LHD) or Air Inlet Grille Panel Replacement (RHD) in Body Front End.
- Remove the wiper motor module mounting bolts (3,5).
- Disconnect the wiper motor electrical connector (4).
- Remove the wiper motor module (1) from the vehicle.