Installation Procedure
WARNING: This page is about a different car, the 2004 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
- Position the sunroof window (3) into the opening, with the window trade mark pointing rearward.
- Install the sunroof window screws (1).
- Finger tighten the screws, do not tighten.
- Carefully close the sunroof window from the vent position to the full closed position.
- Adjust the sunroof window. Refer to Sunroof Window Height and Opening Fit Adjustment .
- Connect the sunroof panel side opening closeout covers (2) to the sunroof window clips.
- Snap the sunroof panel side opening closeout covers into the sunroof window retention clips.
- Close the sunshade.
- Cycle the sunroof window to ensure proper operation and fit.