LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Seville SLS >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Install the cruise control module (1) to the bracket (2).
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the cruise control module bracket fasteners (3).

    Tighten 

    Tighten the fasteners to 7.5 N.m (66 lb in).

    Fig 1: Installing Cruise Control Module To Cruise Control Module Bracket
    G02179452Courtesy of GENERAL MOTORS CORP.
  3. Install the cruise control module (1) onto the studs on the cowl.
  4. Install the fasteners (2).

    Tighten 

    Tighten the cruise control mounting fasteners to 9 N.m (80 lb in).

    Fig 2: Installing Cruise Control Module Assembly
    G02179453Courtesy of GENERAL MOTORS CORP.
  5. Connect the electrical connector to the cruise control module (1).
    IMPORTANT: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable. Refer to CRUISE CONTROL DESCRIPTION AND OPERATION   for the complete operational details.
  6. Install the cruise control cable. Refer to CRUISE CONTROL CABLE REPLACEMENT   . 
scientia non olet · About LEMON Manuals