Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Proper DIM Placement

Courtesy of GENERAL MOTORS CORP.

Install the module to the bracket.
Slide the DIM upward until it is fully engaged.

Fig 2: View Of DIM Module & Electrical Connectors

Courtesy of GENERAL MOTORS CORP.

Connect the DIM electrical connectors (2).
Install the left sound insulator. Refer to Closeout/Insulator Panel Replacement - Left (LHD) or Closeout/Insulator Panel Replacement - Left (RHD) in Instrument Panel, Gages and Console.
Reprogram the Dash Integration Module. Refer to Body Control Module (BCM) Programming/RPO Configuration (IPM) or Body Control Module (BCM) Programming/RPO Configuration (DIM) .