LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Seville SLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 475 (Body Control System) >> Repair Instructions >> Rear Integration Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing RIM
    GM650999Courtesy of GENERAL MOTORS CORP.
  1. Install the RIM (1) to the electrical component mounting panel.
  2. Push the RIM (1) into the opening on the electrical component mounting panel, until an audible click is heard, indicating the Rim (1) is secured to the electrical component mounting panel.
  3. Connect the electrical connections to the RIM (1).
    4. Fig 2: View Of Rear Integration Module Mounting Bracket & Fasteners
    GM625727Courtesy of GENERAL MOTORS CORP.
  4. Install the electrical component mounting panel (1) to the vehicle body.
    5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the electrical component mounting panel nuts (2).

    Tighten:  Tighten the nuts (2) to 9 N.m (80 lb in).

  6. Install the rear storage compartment trim. Refer to Compartment Trim Panel Replacement - Rear in Body Rear End.
  7. Restore the drivers personalization settings. Refer to Driver Personalization in Personalization.
scientia non olet · About LEMON Manuals