LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Seville STS >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Warning Systems >> Tire Pressure Monitoring System >> Repair Instructions >> Tire Pressure Monitoring Sensor Programming >> Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Tire Pressure Monitoring Sensor Programming: Programming

  1. Turn ON the ignition, with the engine OFF.
    IMPORTANT: If the sensor programming mode cannot be activated, ensure the TPM option is enabled in the RCDLR and the IPC as mentioned in the above supporting text.
  2. Press the key fob lock and unlock buttons simultaneously for several seconds. A horn chirp will sound indicating the sensor programming mode is activated.
    IMPORTANT: If the horn chirp does not sound after 15 seconds, remove then replace the sensor programming tool over the valve stem.
  3. Starting with the left front tire, place the J 41760  over the left front valve stem, a horn chirp will sound indicating the sensor's ID code has been programmed.
  4. When the horn chirp sounds, proceed to program the next sensors in the following order:
    • Right front
    • Right rear
    • Left rear
  5. After the left rear sensor is programmed, the horn chirp will sound twice to indicate programming is complete.
scientia non olet · About LEMON Manuals