LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Seville STS >> Repair and Diagnosis >> External Pages >> Different car >> Section 522 (Engine Cooling System) >> Repair Instructions >> Radiator Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View of Radiator
    GM287613Courtesy of GENERAL MOTORS CORP.
  1. Position the radiator behind the condenser.
    2. IMPORTANT: Care should be taken when Installing the condenser not to damage the lower attachment points of both the radiator and condenser.
  2. Position the condenser, aligning the lower feet to the lower mounting features located at the front of the radiator.
    3. Fig 2: A/C Condenser Mounting View
    GM287612Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    IMPORTANT: The bolts retaining the condenser to the radiator end tanks are a special length and should be the ONLY bolts used upon reinstallation. The use of longer bolts will damage the radiator end tanks.
  3. Install the condenser mounting bolts.

    Tighten:  Tighten the bolts to 13 N.m (115 lb in).

  4. Install the cooling fans. Refer to Cooling Fan Replacement - Electric .
scientia non olet · About LEMON Manuals