Auto A/C Torque Specifications
AUTO A/C TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| A/C Compressor Front Bolt | 18 (25) |
| A/C Compressor Lower Rear Mounting Bolt | 18 (25) |
| A/C Compressor Mounting Stud | 37 (50) |
| A/C Compressor Upper Rear Bolt | 37 (50) |
| Condenser Mounting Bolts | 10 (13) |
| Discharge Hose-To-Compressor Bolt | 12 (16) |
| Discharge Hose-To-Condenser Bolt | 15 (20) |
| Condenser Line-To-Evaporator Inlet Line Nut | 18 (24) |
| Evaporator Hose Assembly-To-Accumulator Nut | 15 (20) |
| Evaporator Hose Assembly-To-Condenser Nut | 15 (20) |
| Evaporator Hose Assembly-To-Evaporator Nut | 18 (24) |
| Heater Inlet Pipe Nut | 18 (25) |
| Heater Pipe Inlet Adapter Fitting | 28 (38) |
| Service Fitting | 9 (12) |
| Suction Hose-To-Accumulator Nut | 15 (20) |
| Suction Hose-To-Compressor Nut | 12 (16) |
| INCH Lbs. (N.m) | |
| Actuator Screws | 12 (1.4) |
| Auxiliary Blower Motor Assembly-To-Instrument Panel Support Bracket Nut | 18 (2) |
| Auxiliary Blower Motor Resistor Screw | 12 (1.4) |
| Auxiliary Blower-To-Center Support Bracket Bolt | 18 (2) |
| Blower Motor Control Module Screw | 12 (1.4) |
| Blower Motor Mounting Screws | 12 (1.4) |
| DIM Module Bracket Screws | 12 (1.4) |
| Heater Core Screws | 13 (1.4) |
| Heater Core Cover Screws | 13 (1.4) |
| HVAC Module Retaining Nut | 80 (9) |
| Inside Air Temperature Sensor Screw | 12 (1.4) |
| Instrument Panel Center Support-To-Floor Nuts | 80 (9) |
| Instrument Panel Center Support-To-Instrument Panel Nuts | 80 (9) |
| Low Side Temperature Sensor | 66 (7.5) |
| Refrigerant Pressure Sensor | 44 (5) |
| Temperature Sensor | 66 (7.5) |