LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2003 >> Seville V8-4.6L VIN 9 >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Body Control Module >> Service and Repair >> Dash Integration Module Replacement (RHD)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Dash Integration Module Replacement (RHD)

DASH INTEGRATION MODULE REPLACEMENT (RHD)

REMOVAL PROCEDURE




1. Remove the left sound insulator.

IMPORTANT: Before replacement of the DIM module (1), record the personalization settings in order to transfer the settings after the DIM module (1) has been replaced.

2. Disconnect the DIM electrical connectors (2).




3. Depress inward on the locking tab (2).
4. With the locking tab (2) depressed, slide the DIM (1) downward.
5. Remove the module (1) from the bracket.

INSTALLATION PROCEDURE




1. Install the module to the bracket.
2. Slide the DIM upward until it is fully engaged.




3. Connect the DIM electrical connectors (2).
4. Install the left sound insulator.
5. Reprogram the Dash Integration Module. Refer to Body Control Module (BCM) Programming/RPO Configuration (IPM)Body Control Module (BCM) Programming/RPO Configuration (DIM). Programming and Relearning
scientia non olet · About LEMON Manuals