Remote Recall Memory/Recall Driving Positions

This feature recalls any previously programmed seat and mirror controls when the Unlock button on the remote keyless entry transmitter is pressed.

Programmable Modes

• Mode 1: ON
• Mode 2: OFF, Mode 2 is set as the default mode from the factory.

To determine the mode to which the vehicle is programmed or to program the vehicle to a different mode, use one of the following procedures:

Base Audio System

1. Enter the Personalization menu following the instructions listed previously.
2. Scroll to Remote Recall Memory to highlight it.
3. Press the scroll select knob to switch back and forth between on and off.

Navigation System

1. Enter the Personalization menu following the instructions listed previously.
2. Scroll to Remote Keyless Options to highlight it.
3. Press the scroll/select knob to view the modes.
4. Scroll to Recall Driving Positions and press the knob once to select it.
5. When the mode is turned on, an X will appear in the box to the left.

If Remote Exit Recall or Key In Recall Memory were turned on previously, selecting Remote Recall/Recall Driving Position will override that choice.

The mode you selected is now set. you can either exit the programming mode by following the instructions later in this section or program the next feature available.