Inaccurate Shift Points

Check	Causes
DEFINITION: An upshift or a downshift, or TCC apply, that occurs at a speed outside of the calibrated range. Refer to Shift Speed .
Fluid Pump Assembly	Stuck pressure regulator valve Sticking pump slide
Control Valve Body Accumulator Assembly	Spacer plate and gasket misaligned or damaged
Throttle Position Sensor	Disconnected or damaged
Input Speed Sensor	Disconnected or damaged Bolt not torqued properly
Output Speed Sensor	Disconnected or damaged Bolt not torqued properly
Shift Solenoids	Leaking
Sport Mode active	Shorted switch or circuit