Using Keyless Entry System
- Turn ignition switch to ON position, with engine off. Apply parking brake.NOTE: If learn mode cannot be enabled, TPM system is not enabled in DIM. See appropriate manufacturer service information.
- Using keyless entry transmitter, lock and unlock vehicle doors 3 times in order to synchronize transmitter with the receiver.
- Simultaneously press the keyless entry transmitter's lock and unlock buttons until a horn chirp sounds, indicating the learn mode has been enabled.WARNING: Overinflating tires may cause personal injury or damage to the tires and wheels. When increasing tire pressure, DO NOT exceed the maximum inflation pressure as noted on the tire sidewall.NOTE: If a horn chirp does not sound after 35 seconds for any of the 4 sensors, turn switch to OFF position to exit the learn mode. Repeat the procedure from step 1.
- Starting with left front tire, increase or decrease the pressure for 5-8 seconds, or until a horn chirp sounds. The horn chirp may occur before the 5-8 second pressure increase/decrease time period has been reached, or up to 30 seconds after the 5-8 second pressure increase/decrease time period has been reached.
- After horn chirp has sounded, repeat procedure for the next 3 sensors in the following order: Right Front, Right Rear, Left Rear.
- After left rear sensor has been learned, a double horn chirp will sound, indicating all 4 sensor IDs have been learned. Turn ignition switch to OFF position. Adjust all tire pressures to specification.