Installation Procedure
- Install the theft deterrent control module (2) onto the ignition lock cylinder case assembly (1).
Courtesy of GENERAL MOTORS CORP.
CAUTION: Refer to SIR Inflator Module Coil Caution in Cautions and Notices. - Connect the connector to the theft deterrent control module.
- If necessary, connect the connector to the ignition lock cylinder case.
- Install the lock cylinder. Refer to Ignition Lock Cylinder Replacement .
- Install the upper and lower trim covers. Refer to Steering Column Trim Covers Replacement (Power Tilt) or Steering Column Trim Covers Replacement (Manual Tilt) .
- Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
- Program the theft deterrent control module. Refer to Programming Theft Deterrent System Components .