Scan Tool Data Definitions
- ABS Reference Speed
-
The scan tool displays 0-255 km/h (0-159 mph). The vehicle speed from the average of all four wheel speeds.
- Ignition Voltage
-
The scan tool displays 0-17 Volts. The level of the ignition voltage at the EBCM.
- LF Wheel Speed
-
The scan tool displays 0-255 km/h (0-159 mph). The actual speed of the left front wheel.
- LR Wheel Speed
-
The scan tool displays 0-255 km/h (0-159 mph). The actual speed of the left rear wheel.
- MagnaSteer® Commanded Current
-
The scan tool displays 0.00 to 3.00 amps. The amount of current that the EBCM is commanding to the variable effort steering (VES) actuator.
- MagnaSteer® Failed
-
The scan tool displays Yes or No. Yes indicates the VES system is disabled due to a malfunction. No indicates the system is operating to specifications.
- MagnaSteer® Feedback Current
-
The scan tool displays 0.00 to 3.00 amps. The amount of current returning to the EBCM from the VES actuator.
- MagnaSteer® Indicator/Message
-
the scan tool displays Off or On. The status of the VES indicator or message, if equipped. Indicates if the VES indicator or message is currently on or off.
- RF Wheel Speed
-
The scan tool displays 0-255 km/h (0-159 mph). The actual speed of the right front wheel.
- RR Wheel Speed
-
The scan tool displays 0-255 km/h (0-159 mph). The actual speed of the right rear wheel.
- Switched System Battery Voltage
-
The scan tool displays 0-17 Volts. The voltage available to the EBCM when the ABS relay is energized.