Circuit Description
The body control module (BCM) is the power mode master responsible for sending ignition switch position information on the class 2 serial data link. The BCM monitors 3 discrete wires from the ignition switch contacts and the engine run flag (ERF) in order to determine the present power mode. The BCM communicates this power mode information to all class 2 modules on the class 2 serial data link. The following table represents correct BCM power mode data:
Correct Ignition Switch Inputs (BCM Input & Scan Tool Display)
| Ignition Switch Position | BCM Input and Scan Tool Display | ||
|---|---|---|---|
| Ignition Accessory | Ignition 1 | Ignition 0 | |
| OFF | Inactive | Off | Off |
| UNLOCK | Inactive | Off | On |
| ACC | Active | Off | On |
| ON | Active | On | On |
| START | Inactive | On | On |