LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Entertainment System >> Repair Instructions >> Radio Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Connect the coaxial cable to the radio.
  2. Connect the wire connectors.
  3. Push in the radio assembly in the opening in order to install the screws.
  4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the screws (1).

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

  6. Fig 1: Installing Radio Assembly & Screws
    GM854851Courtesy of GENERAL MOTORS CORP.
  7. Install the cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.
  8. Perform the radio setup, if equipped with UM8. Refer to Radio Setup (With RPO UM8) .

    Refer to Service Programming System (SPS) in Programming for all other audio system configurations for setup.