ABS Automated Bleed Procedure (W/JL4): Notes
NOTE:
When adding fluid to the brake master cylinder reservoir, use only Delco Supreme 11®, GM P/N 12377967 (Canadian P/N 992667), or equivalent DOT-3 brake fluid from a clean, sealed brake fluid container. The use of any type of fluid other than the recommended type of brake fluid, may cause contamination which could result in damage to the internal rubber seals and/or rubber linings of hydraulic brake system components.
NOTE:
Refer to Brake Fluid Effects on Paint and Electrical Components Notice in Cautions and Notices.
IMPORTANT:
The following procedures may be performed on vehicles equipped with option code JL4, Vehicle Stability Enhancement System (VSES).