Differential Assembly: Notes
WARNING: This page is about a different car, the 2003 Chevrolet Corvette and 2002 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
When removing or installing the differential, ensure vehicle is sufficiently supported when removing or adding components from the rear of the vehicle due to weight transfer.
CAUTION:
Failure to follow the proper removal and installation procedures may result in damage to the engine crankshaft thrust bearing. When lowering and removing the rear of the driveline, observe the clearance between the rear of the transaxle assembly and the underbody to prevent damage.
CAUTION:
When tilting down the rear of the driveline, observe the clearance between the rear of the engine and the composite dash panel. See Fig 1. DO NOT allow the engine to rest unsupported against the composite dash panel, or vehicle damage may result.
NOTE:
On models equipped with M/T, when tilting down the rear of the driveline, insert a putty knife or similar tool between the shift control bracket on the driveline support assembly and the brake pipe retainer on the driveline tunnel wall to prevent damage.