Trunk Lid Lock Striker Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.

Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
Detach the trunk lid opener cable.
Remove the bolts, then remove the trunk lid striker.
Install in the reverse order of removal.
Adjust the trunk lid. (See TRUNK LID ADJUSTMENT .)

Fig 1: Removing/Installing Trunk Lid Lock Striker With Torque Specifications
Courtesy of MAZDA MOTORS CORP.