LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 413 (Engine Control System - 8.1L (Introduction)) >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement (Front) >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Yukon XL, 2004 Chevrolet Suburban, and 2004 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Clean all fuel and evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the lines in order to avoid possible fuel and/or EVAP system contamination.
    Fig 1: View Of Fuel Feed Line & Rear Fuel Feed Line
    GM1312082Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement (Front Tank)  or Fuel Tank Replacement (Rear Tank) .
  2. Disconnect and remove the fuel feed line (4) from the module and retaining clips. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  3. Disconnect and remove the rear fuel feed line (2) from the module and retaining clips. Refer to Quick Connect Fitting(s) Service (Plastic Collar) .
  4. Cap the fuel feed and EVAP openings in order to prevent possible fuel/EVAP system contamination.
scientia non olet · About LEMON Manuals