Removal and Replacement

Heated Seat Control Module Replacement - Front

Removal Procedure

Caution: Refer to Restraint System Service Precautions () in Service Precautions




1. Remove the front seat cushion.
2. Disconnect the electrical connector from the heated seat module.
3. Remove the heated seat module screws (2) and remove the module.

Installation Procedure






Notice: Refer to Fastener Notice () in Service Precautions.

1. Install the heated seat control module and install the retaining screws (2).

Tighten the screws to 2 N.m (18 lb in).

2. Connect the electrical connector.
3. Install the seat cushion.