LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Steering Wheel & Steering Column >> Diagnostic Information and Procedures >> Scan Tool Data Definitions >> Steering Column Module (SCM)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Column Module (SCM)

Module Information - 8 Digit GM Part Number

This displays the part number for the SCM.

Module Information - Component Serial No. 8-11

This is the first partition of the serial number.

Module Information - Component Serial No. 12

This is the second partition of the serial number.

Data Display - Data - Motor Current

Displays amperage. This is the current being used by the motor during operation.

Data Display - Data - Telescope Sensor

Displays sensor feedback counts or voltage. Voltage available on scan tool through soft key in the data list.

Data Display - Data - Telescope Tilt Output

Displays the module output command state.

Data Display - Data -Telescope Tilt Switch

Displays switch state which are Idle, In, Out, Up, or Down.

Data Display - Data - Tilt Sensor

Displays sensor feedback counts or voltage. Voltage available on scan tool through soft key in the data list.

Module Information- Calibration ID

This displays the calibration or program revision level used in the PROM.

Module Information- Julian Date Of Build

This displays the day of the year the module was built.

Module Information- PROM ID

This displays the four digit number of the PROM incorporated into the Steering Column Module (SCM).

Module Information- Year Module Built

This displays the four digit year of build.

scientia non olet · About LEMON Manuals