LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Memory Seat Control Module Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Front Seat Assembly Fasteners
    GM669311Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to SIR Caution in Cautions and Notices.
  1. Disable the SIR. Refer to SIR Disabling and Enabling Zone 7 or to SIR Disabling and Enabling Zone 9 in SIR.
  2. Adjust the front seat assembly up and forward in order to access the fasteners (1) at the rear of the front seat cushion assembly
  3. Remove the front seat cushion assembly fasteners (1), at the rear of the seat cushion.
    4. Fig 2: View of Front Seat Cushion & Fasteners
    GM669309Courtesy of GENERAL MOTORS CORP.
  4. Adjust the front seat assembly to the rear of the vehicle.
  5. Angle the front seat cushion (1) up, in order to access the front seat cushion assembly fasteners (2).
  6. Remove the front seat cushion assembly fasteners (2).
  7. Lift the front seat cushion assembly (1) away from the seat riser.
    8. IMPORTANT: The heated seat cushion cover connectors and several wire hold down clips will need to be removed in order to position the seat cushion against the seat back.
  8. Position the seat cushion assembly (1) against the seat back, in order to access the memory seat module rivets and the electrical connector.
    9. Fig 3: View of Memory Seat Module Electrical Connector
    GM295290Courtesy of GENERAL MOTORS CORP.
  9. Disconnect the memory seat module electrical connector.
    10. Fig 4: View of Memory Seat Module Rivets
    GM669304Courtesy of GENERAL MOTORS CORP.
    CAUTION: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
    IMPORTANT: Cover the seat motors and cables in order to avoid metal shavings in the mechanism.
  10. Drill out the rivets (3) retaining the memory seat module (4) to the seat cushion frame.
  11. Remove the memory seat module (4).
  12. Calibrate the seat. Refer to Memory Seat Calibration Procedure .
scientia non olet · About LEMON Manuals