LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls -- 4.6L - Introduction >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Valve Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: View of EGR Valve
    GM602307Courtesy of GENERAL MOTORS CORP.
  1. Install the new gasket.
  2. Install the EGR valve.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the EGR valve retaining nuts/bolts.

    Tighten:  Tighten the retaining nuts/bolts to 24 N.m (18 lb ft).

  5. Install the heat shield and nuts.

    Tighten:  Tighten the retaining nuts to 9 N.m (80 lb in).

  6. Reconnect the EGR valve electrical connector.