LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls -- 4.6L - Introduction >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: MAP, IAC, ECT, TP Sensors
    GM602335Courtesy of GENERAL MOTORS CORP.
  1. Install the MAP sensor (1) into the intake manifold.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the throttle cable bracket and bolts.

    Tighten:  Tighten the bracket bolts to 12 N.m (106 lb in).

  4. Connect the MAP sensor electrical connector.