LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> Seville >> Repair and Diagnosis >> External Pages >> Different car >> Section 87 (Battery, Charging System And Starting System) >> Repair Instructions >> Generator Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Lower Generator Belt & Bolts
    GM780404Courtesy of GENERAL MOTORS CORP.
  1. Position the generator to the A/C compressor and engine.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the generator mounting bolts (1, 2).

    Tighten:  Tighten the generator mounting bolts to 50 N.m (37 lb ft).

    3. Fig 2: View Of Generator Cable & Cable Harness Clips
    GM780408Courtesy of GENERAL MOTORS CORP.
  3. Connect the wiring harness connector to the generator.
  4. Connect the battery positive lead and install the generator output BAT terminal nut.

    Tighten:  Tighten the generator output BAT terminal nut to 12.5 N.m (111 lb in).

  5. Press the protective boot on to the generator output BAT terminal.
  6. Install the radiator. Refer to Radiator Replacement in Engine Cooling.
  7. Install the drive belt. Refer to Drive Belt Replacement in Engine Mechanical-4.6L.
  8. Connect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
scientia non olet · About LEMON Manuals