Scan Tool Data Definitions

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.

Ambient Light Sensor: Displays 0-5 volts. The status of the sunload sensor assembly.
Control Power: Displays On/Off. The commanded state of the control power.
Daytime Running Lamp: Displays On/Off. The commanded state of the daytime running lamp relay.
Driver Door Jamb Sw.: Displays On/Off. The status of the driver door jamb switch.
Flash to Pass Switch: Displays On/Off. The status of the flash to pass switch.
Front Fog Lamp Relay: Displays On/Off. The commanded state of the front fog lamp relay.
Front Fog Lamp Switch: Displays On/Off. The status of the front fog lamp switch.
Hazard Lamp Switch: Displays On/Off. The status of the hazard lamp switch.
Head Lamp Switch: Displays On/Off. The status of the headlamp switch.
High Beam - Flash to Pa: Displays On/Off. The commanded state of the flash to pass control.
High Beam Switch/Relay: Displays On/Off. The status of the headlamp high beam relay control.
Incandescent Dim 1: Displays 0-100%. The percentage of the dimming sent to the incandescent lamps.
Interior Dim Pot: Displays 0-5 volts. The status of the instrument panel lamps dimmer switch input signal.
Interior Lamp Input: Displays On/Off. The status of the inadvertent power input.
Interior Lamp Switch: Displays Auto/On. The status of the interior lamp switch.
Interior Lighting Relay: Displays On/Off. The commanded state of the interior lamp relay.
LED Dimming: Displays 0-100%. The percentage of the dimming sent to the LED lamps.
Left Rear Door Jamb Sw.: Displays On/Off. Indicates the status of the left rear door jamb switch.
Left Turn Signal: Displays On/Off. The status of the discrete left turn signal.
Lights On With Wipers: Displays On/Off. The status of the windshield wiper switch on signal.
Low/High Beam Output: Displays On/Off. The commanded state of the control power.
Overhead Lamps Output: Displays On/Off. The commanded state of the overhead lamps.
Park Lamp: Displays On/Off. The status of the park lamp switch.
Park Lamp Relay Output: Displays On/Off. The commanded state of the park lamp relay.
Pass. Door Jamb Sw.: Displays On/Off. Indicates the status of the passenger door jamb switch.
Position Lamp Relay: Displays On/Off. The commanded state of the standing lamp relay.
Reverse Lamp Relay: Displays On/Off. The commanded state of the reverse lamp relay.
Right Turn Signal: Displays On/Off. The status of the discrete right turn signal.
Rt Rear Door Jamb Sw.: Displays On/Off. Indicates the status of the right rear door jamb switch.
Switch Dimming: Displays 0-100%. The percentage of the dimming sent to the door switches.
Trailer Detection Input: Displays On/Off. The status of the trailer detect signal.
Twilight Delay Pot: Displays 0-5 volts. The status of the twilight sentinel delay switch signal.
VF Dim: Displays 0-100%. The percentage of the dimming sent to the vacuum fluorescent (VF) display of the instrument cluster.