LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2004 >> XLR >> Repair and Diagnosis (Single Page) >> Steering >> Steering Wheel And Steering Column >> Repair Instructions >> Steering Column Lock Control Module Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Identifying The Lock Module In The I/P Carrier
    GM1400454Courtesy of GENERAL MOTORS CORP.
  1. Install the control module to the retaining bracket on the steering column.
  2. Connect the electrical connector to the lock module.
    3. Fig 2: Identifying Steering Column Electronic Lock Harness
    GM1400455Courtesy of GENERAL MOTORS CORP.
  3. Install the I/P carrier. Refer to Instrument Panel (I/P) Carrier Replacement in Instrument Panel, Gages, and Console.
  4. Enable the SIR system. Refer to the following procedures:
  5. Program the lock control module. Refer to Control Module Setup (SCLCM Setup)  or Control Module Setup (Column Calibration) .
scientia non olet · About LEMON Manuals