Scan Tool Output Controls
Scan Tool Output Controls
| Scan Tool Output Control | Additional Menu Selection(s) | Description |
|---|---|---|
| Engine Output Controls | GEN L-Terminal | The engine control module (ECM) commands the generator OFF by removing the 5 V reference signal from the L terminal of the voltage regulator when you select Off. The generator will then stop generating an output voltage. |
| Engine Output Controls | Run/Crank Relay Control | The ECM commands the Run/Crank Relay OFF by removing the ground from the control circuit the Run/Crank Relay when you select OFF. Voltage will then stop flowing through the switch of the Run/Crank Relay. |