HVAC Torque Specifications
HVAC TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) |
|---|---|
| Compressor Drain Plug | 11 (15) |
| Compressor Hose Assembly-To-Compressor Retaining Nut | 15 (20) |
| Compressor Hose-To-Condenser Fitting Bolt | 12 (16) |
| Compressor Mounting Bolts | 37 (50) |
| Compressor Mounting Bracket Bolts | 37 (50) |
| Crossmember Mounting Nuts | 81 (110) |
| Evaporator Inlet Line-To-Air Conditioner Condenser Bolt | 12 (16) |
| Heater Pipe Assembly Retaining Bolt | 10 (14) |
| TXV Block Fitting Nut | 15 (20) |
| INCH Lbs. (N.m) | |
| Actuator Retaining Screws (All) | 14 (1.6) |
| Actuator Support Bracket Retaining Screws | 14 (1.6) |
| Air Distribution Duct Retaining Screws | 14 (1.6) |
| Air Inlet Housing Retaining Screws | 14 (1.6) |
| Blower Motor Retaining Screws | 14 (1.6) |
| Compressor Clutch Assembly Bolt | 89 (10) |
| Compressor High Pressure Relief Valve | 70 (8) |
| Compressor Manifold Stud | 89 (10) |
| Defroster Duct Retaining Screws | 89 (10) |
| Driver Information Center Retaining Screw | 17 (1.9) |
| ECS Position Sensor Mounting Bolt | 26 (3) |
| Engine Wire Harness Bracket Bolt | 89 (10) |
| Floor Air Outlet Duct Retaining Screws (All) | 14 (1.6) |
| Heater Core Cover Retaining Screws | 14 (1.6) |
| Heater Pipe Bracket Retaining Nut | 89 (10) |
| HVAC Control Module Retaining Screws | 14 (1.6) |
| HVAC Module Case Half Screws | 14 (1.6) |
| HVAC Module-To-Dash Retaining Nuts | 89 (10) |
| HVAC Module-To-Upper Instrument Panel Beam Retaining Bolts | 44 (5) |
| Mode Valve Assembly Retaining Screws | 14 (1.6) |
| Refrigerant Pressure Sensor | 44 (5) |
| Speaker-To-Air Distribution Duct Screws | 22 (2.5) |
| TXV-To-Evaporator Core Mounting Bolts | 62 (7) |
| Valve Core | 97 (11) |