LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> CTS Base, 2.8 T, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.8L - Introduction >> Repair Instructions >> Fuel Level Sensor Replacement - Primary >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

    Fig 1: View Of Fuel Level Sensor & Locking Tab
    GM820629Courtesy of GENERAL MOTORS CORP.
  1. Complete the following in order to install the fuel level sensor (1) to the module assembly:
    1. Align the tabs of the sensor (1) with the slots in the module assembly.
    2. Slide the sensor (1) fully into position, ensure the locking tab (2) is engaged.
    2. Fig 2: View Of Primary Fuel Level Sensor Electrical Connector
    GM820628Courtesy of GENERAL MOTORS CORP.
  2. Connect the fuel level sensor electrical connector (1) to the module.
  3. Install the primary fuel tank module. Refer to Fuel Tank Module Replacement - Primary .
scientia non olet · About LEMON Manuals