LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Cadillac >> 2005 >> DeVille Protection Series >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Introduction >> Repair Instructions >> Power Recliner Sensor Replacement - Front >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Snap the recliner sensor to the recliner motor.
    2. Fig 1: View Of Recliner Shaft
    GM295194Courtesy of GENERAL MOTORS CORP.
  2. Slide the recliner shaft back through the recliner sensor and the recliner motor.
    3. Fig 2: View Of Recliner Motor Retaining Clip
    GM295189Courtesy of GENERAL MOTORS CORP.
  3. Install the retaining clip to the recliner shaft.
  4. Connect the recliner motor electrical connector.
  5. Install the seat back trim cover. Refer to Seat Back Trim Replacement - Front .
    6. Fig 3: View Of Lower Seat Belt Retractor Trim Cover & Push Pin Retainer
    GM518896Courtesy of GENERAL MOTORS CORP.
  6. Install the lower seat belt retractor trim cover (2).
  7. Install the push pin fastener (1)
  8. Install the front bucket seat. Refer to Seat Replacement - Bucket .
  9. Calibrate the seat. Refer to Memory Seat Calibration Procedure .
scientia non olet · About LEMON Manuals